This dataset represents the Integrated biodiversity status assessment for grey seals. Status is shown in five categories based on the integrated assessment scores obtained in the tool. Biological quality ratios (BQR) above 0.6 correspond to good status. The status of the grey seals was assessed using four core indicators: - Population trends and abundance of seals - Distribution of Baltic seals - Nutritional status of seals - Reproductive status of seals. The assessment is based on the one-out-all-out approach, i.e. the indicator reflecting the worst status in each assessment unit. This dataset displays the result of the integrated biodiversity status in HELCOM Assessment unit Scale 2 (Division of the Baltic Sea into 17 sub-basins). Attribute information: "HELCOM_ID" = ID of the HELCOM scale 2 assessment unit "level_2" = Name of the HELCOM scale 2 assessment unit "EcosystemC" = Ecosystem component analyzed "BQR" = Biological Quality Ratio "Conf" = Confidence of the assessment "Total_indi" = Number of indicators used "Area_km2" = Area of scale 2 assessment unit "F_of_ar_1" = Share of total area assessed "D1CX" = MSFD descriptor 1 criteria X "conf_D1C_1" = Confidence of the MSFD descriptor 1 criteria 2 "STATUS" = Status assessment category (0-0.2 = not good (lowest score), 0.2-0.4 = not good (lower score), 0.4-0.6 = not good (low score), 0.6-0.8 = good (high score, 0.8-1.0 = good (highest score))

This dataset represents the Integrated biodiversity status assessment for harbour seals. Status is shown in five categories based on the integrated assessment scores obtained in the tool. Biological quality ratios (BQR) above 0.6 correspond to good status. The assessment is based on the one-out-all-out approach, i.e. the indicator reflecting the worst status in each assessment unit. The status of the harbour seals was assessed using two core indicators: - Population trends and abundance of seals - Distribution of Baltic seals. This dataset displays the result of the integrated biodiversity status in HELCOM Assessment unit Scale 2 (Division of the Baltic Sea into 17 sub-basins). Attribute information: "HELCOM_ID" = ID of the HELCOM scale 2 assessment unit "level_2 = Name of the HELCOM scale 2 assessment unit "Area_km2" = Area of the HELCOM scale 2 assessment unit "EcosystemC" = Ecosystem component analyzed "BQR" = Biological Quality Ratio "Conf" = Confidence Total_indi" = Number of indicators used "D1CX" = MSFD descriptor 1 criteria X "conf_D1CX" = Confidence of MSFD descriptor criteria X "STATUS" = Status of assessment (0-0.2 = not good (lowest score), 0.2-0.4 = not good (lower score), 0.4-0.6 = not good (low score), 0.6-0.8 = good (high score, 0.8-1.0 = good (highest score))

This dataset represents the underlying data on core indicator Hexabromocyclododecane (HBCDD). The core indicator evaluates the status of the marine environment based on concentrations of Hexabromocyclododecane (HBCDD) in sediment. Quantitative threshold values are used to evaluate if core indicators status is Achieve, Fail or Not assessed. The threshold value is an environmental quality standard (EQS), derived at EU level as a substance included on the priority list under Directive 2008/105/EC. This dataset displays the result of the indicator in HELCOM Assessment Scale 4 (Division of the Baltic Sea into 17 sub-basins and further division into coastal and off-shore areas and division of the coastal areas by WFD water types or water bodies) Attribute information: "region" = name of region "country" = country "station" = Unique code for station "stationNam" = name for the station "determinan" = determinant parameter "detGroup" = the grouping of determinants used to display the results "_shape" = shape used to map assessment results "colour" = colour used to map assessment results "l3area" = HELCOM assessment unit on scale 3 "l4area" = HELCOM assessment unit on scale 4 "nyall" = total number of years of data "nyfit" = number of years of data used in the assessment "nypos" = number of years with at least one measurement above the limit of detection "lastyear" = most recent year of data "prtrend" = the significance of the change over the most recent 20 years; for the assessment conducted in November 2017 and published in June 2018, this is the period 1996-2016 "rtrend" = annual ‘linear’ change over the most recent 20 years "meanLY" = fitted value in last monitoring year "clLY" = upper one-sided 95% confidence limit on fitted value in last monitoring year "EQS" = Threshold value "EQSdiff" = difference between clLY and EQS "EQSbelow" = whether the mean value in the last monitoring year is significantly below EQS

This dataset contains integrated eutrophication status assessment 2011-2016, visualized for direct effects (C2_ER). The assessment is done on HELCOM Assessment Unit level 4: HELCOM Subbasins with coastal WFD water type or water bodies. The HEAT 3.0 has been applied for open sea assessment units using HELCOM core indicators and for coastal areas using national WFD indicators. For more information about the methodology, see State of the Baltic Sea report and HELCOM Eutrophication assessment manual. Attribute information: "HELCOM_ID": ID of HELCOM Level 4 Assessment unit "Country": Country / opensea "level_2": Name of HELCOM Level 2 Assessment unit "Name": Name of HELCOM Level 4 Assessment unit "Area_km2": Area of assessment unit Descriptio: Name of assessment unit "C1_N": Criteria 1, number of indicators used for calculating Eutrophication ratio (ER) "C1_ER": Criteria 1, ER "C1_SCORE": Criteria 1, Confidence of ER "C2_N": Criteria 2, number of indicators used for calculating ER "C2_ER": Criteria 2, ER "C2_SCORE": Criteria 2, Confidence of ER "C3_N": Criteria 3, number of indicators used for calculating ER "C3_ER": Criteria 3, ER "C3_SCORE": Criteria 3, Confidence of ER "N": Number of criteria used for calculating overall ER "ER": Overall ER "SCORE": Status confidence "STATUS": Status classification (Good (classes 0-0.5 & 0.5-1.0), Not Good (classes 1.0-1.5, 1.5-2.0 & >2.0), Not assessed) "CONFIDENCE": Final confidence rating (< 50% = low, 50-74 % = Moderate, = 75 % = High) "AULEVEL": Level of assessment units

The Diatom/Dinoflagellate index (Dia/Dino index) reflects the dominance patterns in the phytoplankton spring bloom. It has high relevance for the pathway of the food into the pelagic or benthic food web. In principle, the indicator is applicable in all coastal and open sea assessment units, except lagoons, large river plumes and the Bothnian Bay; however, thresholds for the good status are defined only for the southern and central Baltic Sea up to now. The indicator is not yet agreed as a HELCOM core indicator but is tested in the HOLAS II project for the Eastern Gotland Basin. In this assessment unit, the average Dia/Dino index of the years 2011-2016 was just below the threshold value of 0.5 for good status. The confidence of the indicator evaluation depends on the data frequency. The data have to represent the diatom and dinoflagellate blooms adequately. If the diatom bloom is not sufficiently represented in the data, an alternative Dia/Dino index may be applied, based on silicate consumption data. This indicator is robust; its calculation is simple and traceable. The phytoplankton monitoring is operational in the whole Baltic Sea using methods prescribed in the COMBINE manual. Currently, a high quality of the data is assured by the experts of the HELCOM Phytoplankton Expert Group (PEG). The basic data are phytoplankton biomass data, determined as explained in the HELCOM COMBINE manual, originating from the depth of 0 – 10 m. Also silicate data were used that were taken parallel to the phytoplankton sampling. Diatom-dinoflagellate ratio dataset displays the result of the indicator in HELCOM Assessment Scale 2 (Division of the Baltic Sea into 17 sub-basins). Attribute information: "HELCOM_ID" = ID of the HELCOM scale 2 assessment unit "Area (km2)" = Area of the HELCOM assessment unit "Name" = Name of the HELCOM scale 2 assessment unit "Status" = Status of the indicator (“Achieve”, “Fail” or “Not assessed”) "Threshold value" = Threshold value of indicator "Unit" = Unit of the indicator "Indicator value" = Result of the indicator "AULEVEL" = Assessment unit level used for the indicator

This core indicator evaluates the eutrophication status of the Baltic Sea area based on oxygen debt. The oxygen debt value is calculated based on data reported to HELCOM COMBINE database using script developed in TARGREV project and further developed within EUTRO OPER project. The R-script for calculating oxygen is accessible from https://github.com/ices-tools-prod/HEAT/tree/master/scripts/OxygenDebt This dataset displays the result of the indicator in HELCOM Assessment Scale 4 (Division of the Baltic Sea into 17 open sea sub-basins and division of coastal areas to WFD water types or water bodies), but applicable only to certain open sea assessment units. Coastal areas were excluded from the shapefile. Attribute information: "HELCOM_ID" = Code of the HELCOM scale 4 assessment unit "Country" = country/ opensea "level_2" = name of subbasin "level_4" = Name of the HELCOM scale 4 assessment unit "Area (km2)" = Area of the HELCOM scale 2 assessment unit “Name_1” = "Name" = Name of the open sea area “Season” = Season of the indicator “Period” = Assessment unit period (20112016 = 2011 – 2016) "Indicator value (ES)" = Indicator value calculated for the assessment unit "Standard deviation (STD)" = Standard deviation of data used for calculating ES "Number of samples " = Number of samples in assessment unit "Thershold value (ET)" = Commonly agreed thershold value "Ratio between ES and ET (ER)" = Ratio between ES and ET (in case of indicator with positive response to eutrophication) "ES_SCORE” = Confidence based on the data used for calculating ES "ET_SCORE” = Confidence of target-setting procedure "I_SCORE” = Confidence (%) = average of ES-Score and ET-Score "Indicator Weight" = Indicator Weight in integrated eutrophication assessment “Status” = Status of the indicator (“Achieve”, “Fail”, “Not assessed” or "Not applicable") “Confidence” = Confidence of result based on I-SCORE (“High”, “Moderate” or “Low”) "AULEVEL" = Assessment unit level used for the indicator

This indicator evaluates the eutrophication status of the Baltic Sea area based on annual total nitrogen concentration. The measured average total nitrogen is derived from in-situ measurements from oceanographic monitoring data for 2011-2016 (µmol/l), surface water (0-10 m). More detailed description on methodology can be found at http://www.helcom.fi/baltic-sea-trends/indicators/total-nitrogen-(tn)/ and http://www.helcom.fi/Documents/Eutrophication%20assessment%20manual.pdf This dataset displays the result of the indicator in HELCOM Assessment Scale 4 (Division of the Baltic Sea into 17 open sea sub-basins and division of coastal areas to WFD water types or water bodies). The open sea areas have been assessed based on HELCOM Monitoring data and results for coastal areas are based on national WFD results. Some of the open sea areas have not been assessed due to lack of commonly agreed threshold value. Attribute information: “HELCOM_ID” = Code of the HELCOM scale 4 assessment unit "Country" = Country/ Opensea "level_2" = Name of the HELCOM scale 2 assessment unit "Name" = Name of the HELCOM scale 4 assessment unit” "Area (km2)" = Area of the HELCOM scale 2 assessment unit "Indicator" = Name of indicator “Season” = Season of the indicator “Period” = Assessment unit period (20112016 = 2011 – 2016) "Indicator value (ES)" = Indicator value calculated for the assessment unit "Standard deviation (STD)" = Standard deviation of data used for calculating ES "Number of samples " = Number of samples per assessment unit "Thershold value (ET)" = Commonly agreed thershold value "Ratio between ES and ET (ER)" = Ratio between ES and ET (in case of indicator with positive response to eutrophication) "ES_SCORE” = Confidence based on the data used for calculating ES "ET_SCORE” = Confidence of target-setting procedure "I_SCORE” = Confidence (%) = average of ES-Score and ET-Score "Indicator Weight" = Indicator Weight in integrated eutrophication assessment “Status” = Status of the indicator (“Good”, “Not good”, “Not assessed” or "Not applicable") “Confidence” = Confidence of result based on I-SCORE (“High”, “Moderate” or “Low”) "AULEVEL" = Assessment unit level used for the indicator "ET_wint" = Commonly agreed thershold value in winter "ER_winter" = Ratio between ES and ET (in case of indicator with positive response to eutrophication) in winter "Winter status" = Status of the indicator (“Achieve”, “Fail” or “Not assessed”) in winter

This indicator evaluates the eutrophication status of the Baltic Sea area based on annual total phosphorus concentration. The measured average total phosphorus on in-situ measurements from oceanographic monitoring data for 2011-2016 (µmol/l), surface water (0-10 m). More detailed description on methodology can be found at http://www.helcom.fi/baltic-sea-trends/indicators/total-phosphorus-(tp)/ and http://www.helcom.fi/Documents/Eutrophication%20assessment%20manual.pdf This dataset displays the result of the indicator in HELCOM Assessment Scale 4 (Division of the Baltic Sea into 17 open sea sub-basins and division of coastal areas to WFD water types or water bodies). The open sea areas have been assessed based on HELCOM Monitoring data and results for coastal areas are based on national WFD results. Some of the open sea areas have not been assessed due to lack of commonly agreed threshold value. Attribute information: “HELCOM_ID” = Code of the HELCOM scale 4 assessment unit "Country" = Country/ Opensea "level_2" = Name of the HELCOM scale 2 assessment unit "Name" = Name of the HELCOM scale 4 assessment unit” "Area (km2)" = Area of the HELCOM scale 2 assessment unit "Indicator" = Name of indicator “Season” = Season of the indicator (Summer = June-September) “Period” = Assessment unit period start and end year (20112016 = 2011 – 2016) "Indicator value (ES)" = Indicator value calculated for the assessment unit "Standard deviation (STD)" = Standard deviation of data used for calculating ES "Number of samples " = Number of samples "Thershold value (ET)" = Commonly agreed thershold value "Ratio between ES and ET (ER)" = Ratio between ES and ET (in case of indicator with positive response to eutrophication) "ES_SCORE” = Confidence based on the data used for calculating ES "ET_SCORE” = Confidence of target-setting procedure "I_SCORE” = Confidence (%) = average of ES-Score and ET-Score "Indicator Weight" = Indicator Weight in integrated eutrophication assessment “Status” = Status of the indicator (“Good”, “Not good”, “Not assessed” or "Not applicable") “Confidence” = Confidence of result based on I-SCORE (“High”, “Moderate” or “Low”) "AULEVEL" = Assessment unit level used for the indicator "Winter status" = Status of the indicator (“Achieve”, “Fail” or “Not assessed”) in winter "Winter ratio between ES and ET (ER)" = Ratio between ES and ET (in case of indicator with positive response to eutrophication) in winter "Winter indicator value (ES)" = Commonly agreed thershold value in winter

This dataset represents the underlying biota data on core indicator Polyaromatic hydrocarbons (PAH) and their metabolites. The core indicator evaluates the status of the marine environment based on concentrations of Polyaromatic hydrocarbons (PAH) in sediment and biota. Quantitative threshold value is used to evaluate if core indicators status is Achieve, Fail or Not assessed. As There is no commonly agreed threshold value for measuring metabolites available, this report only considers concentrations of contaminants. This dataset displays the result of the indicator in HELCOM Assessment Scale 4 (Division of the Baltic Sea into 17 sub-basins and further division into coastal and off-shore areas and division of the coastal areas by WFD water types or water bodies). Attribute information: "region" = name of subbasin "country" = country "station" = Unique code for the station "stationNam" = name for the station "determinan" = determinant parameter (FLU = fluoranthene, BAP = benzo(a)pyrene) "detGroup" = the grouping of determinands used to display the results "species" = species of measurement "_shape" = shape used to map assessment results "colour" = colour used to map assessment results "l3area" = HELCOM assessment unit on scale 3 "l4area" = HELCOM assessment unit on scale 4 "nyall" = total number of years of data "nyfit" = number of years of data used in the assessment "nypos" = number of years with at least one measurement above the limit of detection "lastyear" = most recent year of data "prtrend" = the significance of the change over the most recent 20 years; for the assessment conducted in November 2017 and published in June 2018, this is the period 1996-2016 "rtrend" = annual ‘linear’ change over the most recent 20 years "meanLY" = fitted value in last monitoring year "clLY" = upper one-sided 95% confidence limit on fitted value in last monitoring year "HQS" = Threshold value "HQSdiff" = difference between clLY and HQS "HQSbelow" = whether the mean value in the last monitoring year is significantly below HQS

This indicator evaluates the eutrophication status of the Baltic Sea area based on dissolved inorganic phosphorus (DIP) concentration. The measured average DIP is based on in-situ PO4 measurements from oceanographic monitoring data for winter period (December-February) 2011-2016 (umol/l), surface water (0-10 m). More detailed description on methodology can be found at http://www.helcom.fi/baltic-sea-trends/indicators/Dissolved-inorganic-phosphorus-(DIP) and http://www.helcom.fi/Documents/Eutrophication%20assessment%20manual.pdf This dataset displays the result of the indicator in HELCOM Assessment Scale 4 (Division of the Baltic Sea into 17 open sea sub-basins and division of coastal areas to WFD water types or water bodies). The open sea areas have been assessed based on HELCOM Monitoring data and results for coastal areas are based on national WFD results. Attribute information: "HELCOM_ID" = Code of the HELCOM scale 4 assessment unit "Country" = country "level_2" = name of subbasin "name" = Name of the HELCOM scale 4 assessment unit "Area (km2)" = Area of the HELCOM scale 2 assessment unit "Indicator" = Name of indicator “Season” = Season of the indicator (Winter = December-February) “Period” = Assessment unit period (20112016 = 2011 – 2016) Indicator value (ES) = Indicator value calculated for the assessment unit "Standard deviation (STD)" = Standard deviation of data used for calculating ES "Number of samples " = Number of samples in assessment unit "Thershold value (ET)" = Commonly agreed thershold value "Ratio between ES and ET (ER)" = Ratio between ES and ET (in case of indicator with positive response to eutrophication) "ES_SCORE” = Confidence based on the data used for calculating ES "ET_SCORE” = Confidence of target-setting procedure "I_SCORE” = Confidence (%) = average of ES-Score and ET-Score "Indicator Weight" = Indicator Weight in integrated eutrophication assessment “Status” = Status of the indicator (“Achieve”, “Fail”, “Not assessed” or "Not applicable") “Confidence” = Confidence of result based on I-SCORE (“High”, “Moderate”, “Low” or "Not assessed") "AULEVEL" = Assessment unit level used for the indicator